How To Fix REXCJP334 - Start reading missing for meter & assigned to & for period &

SAP Error Message - Details

• Message type: E = Error

• Message class: REXCJP - Localization Flexible Real Estate Japan

• Message number: 334

• Message text: Start reading missing for meter & assigned to & for period &

What causes this issue?

Start meter reading missing for the selected meter and period.

System Response

The system issues an error message and will not allow you to continue with this transaction until the error is resolved.

How to fix this error?

Interpretation of the measurement documents for the service charge
settlement with fix unit prices in Japan:
The first measurement document defined for a day shows the final meter
reading on the day before the date of the measurement document.
Additional measurement documents defined for a day show the meter
readings on the day of the measurement documents.
Example:
For a meter, there are the following measurement documents:
31.12.2005,, 0,000,,kWh,,( shows the consumption till 30.12.2005 )
31.01.2006,,1000,000,,kWh,,( shows the consumption between 31.12.2005 -
30.01.2006 )
28.02.2006,,1000,000,,kWh,,( shows the consumption between 31.01.2006 -
27.02.2006 )
For the period 01.01.2006 - 31.01.2006, the consumption will be in this
case: 1003 kWh.
( 30 day * 1000 kWh / 31 day + 1 day * 1000 kWh / 28 day = 1003 kWh )

Procedure for System Administrators

Error message extract from SAP system. Copyright SAP SE.

Smart SAP Assistant

• What is the cause and solution for SAP error message REXCJP334 - Start reading missing for meter & assigned to & for period & ?

  The SAP error message REXCJP334 indicates that there is a missing start reading for a meter that is assigned to a specific object (like a contract or a location) for a given period. This error typically occurs in the context of SAP's Utilities Management module, particularly when dealing with meter readings and billing processes.
  Cause:
  
  
  Missing Start Reading: The primary cause of this error is that the system cannot find a valid start reading for the specified meter for the defined period. This could happen if:
  
  The meter has not been read for the specified period.
  The reading was not recorded or was deleted.
  There is a mismatch in the meter assignment or configuration.
  
  
  
  Incorrect Configuration: The meter might not be properly configured in the system, or there may be issues with the assignment of the meter to the relevant contract or location.
  
  
  Data Entry Errors: Manual data entry errors can lead to missing or incorrect readings.
  
  
  Solution:
  
  
  Check Meter Readings: Verify if there are any recorded meter readings for the specified period. You can do this by navigating to the relevant transaction in SAP (e.g., transaction code EL31 for meter reading).
  
  
  Enter Missing Readings: If a start reading is indeed missing, you will need to enter the correct reading for the meter for the specified period. This can usually be done through the meter reading entry transaction.
  
  
  Review Meter Configuration: Ensure that the meter is correctly configured and assigned to the appropriate contract or location. Check the master data for the meter to confirm that it is active and correctly linked.
  
  
  Check for Deletions: If readings were previously recorded but are now missing, check if they were accidentally deleted or if there were any changes made to the meter's configuration.
  
  
  Consult Documentation: Refer to SAP documentation or help resources for specific guidance on handling meter readings and resolving related errors.
  
  
  Contact Support: If the issue persists after checking the above points, consider reaching out to your SAP support team or consulting with an SAP expert for further assistance.
  
  
  Related Information:
  
  Transaction Codes: Familiarize yourself with relevant transaction codes such as EL31 (Meter Reading), EL30 (Display Meter Reading), and EL19 (Display Meter Reading Document).
  SAP Notes: Check SAP Notes for any known issues or patches related to this error message.
  User Manuals: Review user manuals or training materials related to SAP Utilities Management for best practices in managing meter readings.
  
  By following these steps, you should be able to identify the cause of the REXCJP334 error and implement the necessary solutions to resolve it.