How To Fix REXCJP335 - Start or end reading missing for meter & assigned to & for period &

SAP Error Message - Details

• Message type: E = Error

• Message class: REXCJP - Localization Flexible Real Estate Japan

• Message number: 335

• Message text: Start or end reading missing for meter & assigned to & for period &

What causes this issue?

Start or end meter reading missing for the selected meter and period.

System Response

The system issues an error message and will not allow you to continue with this transaction until the error is resolved.

How to fix this error?

Interpretation of the measurement documents for the service charge
settlement with fix unit prices in Japan:
The first measurement document defined for a day shows the final meter
reading on the day before the date of the measurement document.
Additional measurement documents defined for a day show the meter
readings on the day of the measurement documents.
Example:
For a meter, there are the following measurement documents:
31.12.2005,, 0,000,,kWh,,( shows the consumption till 30.12.2005 )
31.01.2006,,1000,000,,kWh,,( shows the consumption between 31.12.2005 -
30.01.2006 )
28.02.2006,,1000,000,,kWh,,( shows the consumption between 31.01.2006 -
27.02.2006 )
For the period 01.01.2006 - 31.01.2006, the consumption will be in this
case: 1003 kWh.
( 30 day * 1000 kWh / 31 day + 1 day * 1000 kWh / 28 day = 1003 kWh )

Procedure for System Administrators

Error message extract from SAP system. Copyright SAP SE.

Smart SAP Assistant

• What is the cause and solution for SAP error message REXCJP335 - Start or end reading missing for meter & assigned to & for period & ?

  The SAP error message REXCJP335 indicates that there is a missing start or end reading for a meter that is assigned to a specific object (like a contract or a location) for a given period. This error typically occurs in the context of SAP's IS-U (Industry Solution for Utilities) module, which is used for managing utility services such as electricity, water, and gas.
  Cause:
  
  
  Missing Readings: The primary cause of this error is that the system cannot find the required start or end meter readings for the specified period. This could be due to:
  
  Readings not being recorded or entered into the system.
  Readings being deleted or not saved properly.
  Incorrect configuration or assignment of the meter to the contract or location.
  
  
  
  Incorrect Period: The specified period may not have valid readings associated with it, either because the readings were not taken or because they fall outside the expected range.
  
  
  Data Inconsistencies: There may be inconsistencies in the data related to the meter, such as incorrect assignments or missing master data.
  
  
  Solution:
  
  
  Check Meter Readings: Verify that the start and end readings for the specified meter and period exist in the system. You can do this by:
  
  Navigating to the relevant transaction (e.g., transaction code EL31 for meter reading documents).
  Checking the meter reading history for the specific meter.
  
  
  
  Enter Missing Readings: If readings are missing, you will need to enter them manually. This can be done through the appropriate transaction for entering meter readings.
  
  
  Review Assignments: Ensure that the meter is correctly assigned to the relevant contract or location. Check the master data for the meter and the contract to confirm that they are linked properly.
  
  
  Data Consistency Checks: Run data consistency checks to identify any discrepancies in the meter data. This can help in identifying any other underlying issues that may be causing the error.
  
  
  Consult Documentation: Refer to SAP documentation or help resources for specific guidance on handling meter readings and resolving related errors.
  
  
  Related Information:
  
  Transaction Codes: Familiarize yourself with relevant transaction codes such as EL31 (Display Meter Reading Document), EL30 (Create Meter Reading Document), and EL22 (Display Meter Reading).
  SAP Notes: Check SAP Notes for any known issues or patches related to this error message. SAP Notes can provide additional context or solutions.
  User Roles and Authorizations: Ensure that the user has the necessary authorizations to view and enter meter readings.
  
  If the issue persists after following these steps, it may be beneficial to consult with your SAP support team or a technical consultant who specializes in the IS-U module for further assistance.