How To Fix CBGL00113 - Distance between labels has been adjusted for label stock &1

SAP Error Message - Details

• Message type: E = Error

• Message class: CBGL00 - GLM: Standard Messages

• Message number: 113

• Message text: Distance between labels has been adjusted for label stock &1

What causes this issue?

The label stock &V1& used for printing is not configured correctly. The
number of labels for each row or column is greater than 1 but the
distance between labels was not specified.

System Response

The label spacing will be defined automatically by the system in
accordance with the label width and label height.

How to fix this error?

Check the following settings for the <DS:TRAN.CBGL_LS02>label stock</>:
The vertical distance must be greater than the height of the label.
The horizontal distance must be greater than the width of the label.
If you want to print multiple labels on the label stock, you need to
maintain the following settings:
Number of labels for each row and column
Horizontal and vertical distance between the labels
Distance to the left and right edge
If the distance between the labels is less than the actual label size,
individual labels might be cut off or labels might overlap.

Procedure for System Administrators

The system issues an error message and will not allow you to continue with this transaction until the error is resolved.

Error message extract from SAP system. Copyright SAP SE.

Smart SAP Assistant

• What is the cause and solution for SAP error message CBGL00113 - Distance between labels has been adjusted for label stock &1 ?

  The SAP error message CBGL00113 indicates that the distance between labels on the specified label stock has been adjusted. This typically occurs when the system detects that the labels are too close together or that the layout does not conform to the specifications required for the label stock being used.
  Cause:
  
  Label Stock Configuration: The label stock settings in the system may not match the physical label stock being used. This can include incorrect dimensions or spacing settings.
  Label Layout: The layout of the labels in the print program may not be properly configured, leading to labels being too close together.
  Printer Settings: The printer settings may not be aligned with the label stock specifications, causing the system to adjust the label distances automatically.
  Data Entry Errors: Incorrect data entry in the label printing transaction can lead to misalignment and spacing issues.
  
  Solution:
  
  
  Check Label Stock Settings: Verify the configuration of the label stock in SAP. Ensure that the dimensions, margins, and spacing settings are correct and match the physical label stock.
  
  Go to the label stock configuration in the SAP system and review the settings.
  
  
  
  Review Label Layout: Check the layout of the labels in the print program. Make sure that the labels are designed to fit within the specified dimensions of the label stock.
  
  Adjust the layout if necessary to ensure proper spacing between labels.
  
  
  
  Printer Configuration: Ensure that the printer settings are correctly configured for the type of label stock being used. This includes checking the paper size, margins, and any other relevant settings.
  
  Consult the printer manual or settings to ensure compatibility.
  
  
  
  Test Print: After making adjustments, perform a test print to verify that the labels are printing correctly and that the spacing is appropriate.
  
  
  Consult Documentation: If the issue persists, refer to SAP documentation or support resources for further troubleshooting steps specific to your version of SAP.
  
  
  Related Information:
  
  SAP Notes: Check for any relevant SAP Notes that may address this specific error message or provide additional guidance.
  User Forums: Engage with SAP user communities or forums where similar issues may have been discussed.
  SAP Support: If the problem cannot be resolved internally, consider reaching out to SAP support for assistance.
  
  By following these steps, you should be able to identify the cause of the error and implement a solution to resolve it.