How To Fix EE_AMI_MSG019 - Nachricht kann nicht an Gerät &1/&2 gesendet werden

SAP Error Message - Details

• Message type: E = Error

• Message class: EE_AMI_MSG - Message Class for AMI Messaging

• Message number: 019

• Message text: Nachricht kann nicht an Gerät &1/&2 gesendet werden

Was verursacht dieses Problem?

You have tried to send a message to the device with serial number &V1&,
device category &V2& (equipment &V3&), but an error has occurred.
Possible errors are:
<ZH>AMI communication error during sending</>
Check the log data in Monitoring of AMI Communication (transaction
EAMIMON01).
Call the transaction and in the <LS>Object Type</> field, choose
<LS>Text Messaging-Bulk Message.</>
<ZH>Send message to more than one AMS</>
You have tried to send the message from the <LS>Messaging </>mass
activity (transaction EAMIMSGSEND01) and the equipment you have selected
is assigned to more than one Advanced Metering System (AMS).

Systemantwort

The message cannot be sent; the message is saved with message status
<LS>Message with Errors</>.

Wie behebe ich diesen Fehler?

Depending on the type of error, try one of the following:
<ZH>Error: AMI communication error during sending</>
Once the problem in the AMI communication is solved, you have the
following possibilities:
Select the message you tried to send (now the message has the status
<LS>Message with Errors</>) and send it again from transactions
<LS>Display Device Information Record</> (transaction EG43), <LS>Display
Material/Serial Number </>(transaction IQ03), or <LS>Mass activity:
Messaging</> (transaction EAMIMSGSEND01).
Set the message to <LS>Manually completed</> in transactions <LS>Display
Device Information Record</> (transaction EG43) or <LS>Display
Material/Serial Number </>(transaction IQ03).
To do this, you need the authorization <LS>Set Message to "Manually
Completed" </>of the authorization object for messaging E_AMI_MSG.
Delete the message in transactions <LS>Display Device Information Record
</> (transaction EG43) or <LS>Display Material/Serial Number
</>(transaction IQ03).
To do this, you need the authorization <LS>Delete Messages </>of the
authorization object for messaging E_AMI_MSG.
<ZH>Error: Send message to more than one AMS</>
Make sure that the equipment you select in the mass activity
<LS>Messaging </>(transaction EAMIMSGSEND01) is all assigned to the same
AMS.
To find out about the assigned AMS, you can use transactions <LS>Display
Device Information Record</> (transaction EG43) or <LS>Display
Material/Serial Number </>(transaction IQ03).

Vorgehensweise für Systemadministratoren

Das System gibt eine Fehlermeldung aus und erlaubt Ihnen nicht, mit dieser Transaktion fortzufahren, bis der Fehler behoben ist.

Fehlermeldungsextrakt aus SAP-System. Copyright SAP SE