How To Fix IR204 - No fue posible determinar propuestas para una transf.valores medidos

SAP Error Message - Details

• Message type: E = Error

• Message class: IR - PM: IMRC - Measurement Readings and Counters

• Message number: 204

• Message text: No fue posible determinar propuestas para una transf.valores medidos

¿Qué causa este problema?

You have initiated a program function which should determine default
values for the transfer of <DS:GLOS.measurement_reading>measurement</>
/<DS:GLOS.counter_reading>counter readings</> between
<DS:GLOS.measuring_point>measuring points</>/ <DS:GLOS.counter>counters
</>.

Respuesta del sistema

You can start this function from two different screens. The system then
works as follows:

El sistema emite un mensaje de error y no le permitirá continuar con esta transacción hasta que se resuelva el error.

If the function is started from the detail screen of a measuring point,
only default values for this measuring point are determined.
If the function is started from the overview screen of the measuring
points for a technical object, default values are determined for all
measuring points of the current technical object and all subordinate
objects.
Requirements:
The indicator <LS>MR transfer supported</> must first have been set at
the respective measuring point.
In this case, the system could not determine default values for a
measurement reading transfer.

¿Cómo arreglar este error?

Observe the search criteria used by the system:
The transfer of measurement/counter readings is only possible if the
measuring points/counters concerned use the same characteristic.
To create default values, the system always searches the superior
technical objests for the current object from the bottom upwards, for
example, first the <DS:GLOS.installation_location>installation location
</> of a piece of <DS:GLOS.equipment>equipment</> and then the superior
objects assigned to the installation location.
If one or more transfer options are found for a receiving measuring
point in a superior technical object, the search for this measuring
point will be terminated.

Extracto de mensaje de error del sistema SAP. Copyright SAP SE.