How To Fix O3284 - AGA8:Error code 17/37: Test (reference) temperature is out of range

SAP Error Message - Details

• Message type: E = Error

• Message class: O3 - IS-Oil: HPM messages (goods movements, QCI, deliveries)

• Message number: 284

• Message text: AGA8:Error code 17/37: Test (reference) temperature is out of range

What causes this issue?

One of the test reference temperatures is out of range. The AGA c-code
cannot calculate a compression factor.

System Response

The QCI (Quantity Conversion Interface) stops processing.

How to fix this error?

Check that all test temperatures are within the valid range, which is,
according to the AGA c-code documentation:

The system issues an error message and will not allow you to continue with this transaction until the error is resolved.

32.0 < T / ?Fahrenheit < 77.0
or
0.0 < T / ?Celsius < 25.0
These limits are close to the limits defined in ISO 13443.

Procedure for System Administrators

Error message extract from SAP system. Copyright SAP SE.

Smart SAP Assistant

• What is the cause and solution for SAP error message O3284 - AGA8:Error code 17/37: Test (reference) temperature is out of range ?

  The SAP error message O3284 AGA8: Error code 17/37 indicates that there is an issue with the test (reference) temperature being out of the acceptable range during a quality inspection or testing process. This error typically arises in the context of quality management (QM) within SAP, particularly when dealing with material inspections or tests that require specific temperature conditions.
  Cause:
  
  Temperature Settings: The reference temperature set for the test may be outside the defined limits in the material specification or inspection plan.
  Material Specifications: The material being tested may have specific temperature requirements that are not being met.
  Calibration Issues: The equipment used for testing may not be calibrated correctly, leading to inaccurate temperature readings.
  Environmental Factors: External conditions affecting the testing environment may cause the temperature to deviate from the required range.
  
  Solution:
  
  Check Inspection Plan: Review the inspection plan associated with the material to ensure that the reference temperature is correctly defined and within the acceptable range.
  Adjust Temperature Settings: If the reference temperature is indeed out of range, adjust it to fall within the specified limits.
  Verify Equipment Calibration: Ensure that the testing equipment is properly calibrated and functioning correctly. If necessary, recalibrate the equipment.
  Environmental Control: Make sure that the testing environment is controlled and that the temperature is maintained within the required range during testing.
  Consult Documentation: Refer to the material specifications and quality standards to ensure compliance with temperature requirements.
  
  Related Information:
  
  SAP Documentation: Check SAP Help documentation for specific details on error codes and troubleshooting steps related to quality management.
  Quality Management Module: Familiarize yourself with the QM module in SAP, as it provides tools for managing quality inspections and tests.
  User Forums and Support: Engage with SAP user communities or forums for additional insights and solutions from other users who may have encountered similar issues.
  SAP Notes: Look for any relevant SAP Notes that may address this specific error or provide updates and patches that could resolve the issue.
  
  By following these steps, you should be able to identify the cause of the error and implement a solution to resolve it.