How To Fix FASTEDM032 - TOU formula &1 does not support conversion of unit of meas. &2 to &3

SAP Error Message - Details

• Message type: E = Error

• Message class: FASTEDM -

• Message number: 032

• Message text: TOU formula &1 does not support conversion of unit of meas. &2 to &3

What causes this issue?

The <DS:DE.E_MDUSFORM>TOU formula</> &v1& can convert a value into
<DS:DE.MSEHI>measurement unit</> &v2&, but not into measurement unit
&v3&.
The conversion of measurement units is necessary if the profile values
and the output parameters of the TOU formula have different units of
measurement. In some cases, the formula classes provided by SAP support
the conversion of units of measurement: See
<DS:TX.ISU_FASTEDM_FORMULA_UNIT>Conversion of Units of Measurement</>.

System Response

If it is not possible to convert the unit of measurement, the execution
of the formula is terminated.

How to fix this error?

Correct the unit of measurement in the formula or use a different
profile for TOU billing for the profile.

Procedure for System Administrators

The system issues an error message and will not allow you to continue with this transaction until the error is resolved.

Error message extract from SAP system. Copyright SAP SE.

Smart SAP Assistant

• What is the cause and solution for SAP error message FASTEDM032 - TOU formula &1 does not support conversion of unit of meas. &2 to &3 ?

  The SAP error message FASTEDM032 indicates that there is an issue with the conversion of units of measurement in a Time of Use (TOU) formula. This error typically arises when the system encounters a situation where it cannot convert one unit of measurement to another as specified in the formula.
  Cause:
  
  Incompatible Units: The units of measurement specified in the TOU formula are not compatible with each other. For example, trying to convert from a volume measurement to a weight measurement without a defined conversion factor.
  Missing Conversion Factors: The necessary conversion factors for the units involved may not be defined in the system.
  Incorrect Configuration: The TOU formula may be incorrectly configured, leading to mismatches in expected units of measurement.
  Data Entry Errors: There may be errors in the data entry where the units of measurement are incorrectly specified.
  
  Solution:
  
  Check Unit Compatibility: Review the units of measurement used in the TOU formula. Ensure that they are compatible and that a valid conversion exists.
  Define Conversion Factors: If the conversion factors are missing, you may need to define them in the system. This can usually be done in the configuration settings for units of measurement.
  Review TOU Formula Configuration: Go through the configuration of the TOU formula to ensure that it is set up correctly. Look for any discrepancies in the units specified.
  Correct Data Entry: Verify the data entries related to the TOU formula to ensure that the units of measurement are entered correctly.
  Consult Documentation: Refer to SAP documentation or help resources for guidance on configuring TOU formulas and units of measurement.
  
  Related Information:
  
  SAP Notes: Check for any relevant SAP Notes that may address this specific error or provide additional guidance.
  Transaction Codes: Familiarize yourself with transaction codes related to TOU configuration and unit of measurement settings, such as SPRO for configuration.
  User Forums: Consider visiting SAP community forums or user groups where similar issues may have been discussed, and solutions shared.
  
  If the issue persists after following these steps, it may be beneficial to consult with an SAP expert or your organization's SAP support team for further assistance.